Fluke 435 Three Phase Power Quality Analyzer Meter w/ Interharmonics Inrush

Description

ebay template
The Following Items Are Included:
Fluke 435 Power Quality Analyzer w/ Options: (BC# 42686)
Transients
Inrush
Interharmonics
Energy
Memory
Mains Signaling
Logger
(4) Fluke 1400s AC Current Clamps
(5) Fluke Test Leads
(5) Fluke Alligator Clip
Fluke Optical Interface Cable
Fluke 435 Getting Started Guide
AC Adapter/Charger
Strap For Unit
User Manual On CD-ROM
Hard Carrying Case
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Fluke 435 HandHeld Three-Phase Power Quality Analyzer
Installed Options:
- Transients
- Inrush
- Interharmonics
- Energy
- Memory
- Mains Signaling
- Logger
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
Fluke 435 Power Quality Analyzer
These three-phase power quality meters help you locate, predict, prevent and troubleshoot problems in power distribution systems. These easy-to-use power quality tools are a “must have” for any person who maintains or troubleshoots three phase power. The new IEC Class A standards for flicker and power quality are built right in to take the guess work out of power monitoring.
Troubleshoot real-time: Analyze the trends using the cursors and zoom tools-even while background recording continues
Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
Automatic Transient Mode: Capture 200 kHz waveform data on all phases simultaneously up to 6 kV
Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
Measure all three phases and neutral: With included four current probes
AutoTrend: Every measurement you see is always automatically recorded, without any setup
System-Monitor: Up to ten power quality parameters on one screen according to EN50160 power quality standard
Inrush mode: For troubleshooting nuisance circuit breaker tripping
View graphs and generate reports: With included analysis software
Logger function: Configure for any test condition with memory for over 400 parameters at user defined intervals
Mains signaling: Measure interference from ripple control signals at specific frequencies
Battery Life: Seven hours operating time per charge on NiMH battery pack
Applications
Frontline troubleshooting – quickly diagnose problems on-screen to get your operation back online
Predictive maintenance – detect and prevent power quality issues before they cause downtime
Quality of service compliance – validate incoming power quality at the service entrance
Long-term analysis – uncover hard-to-find or intermittent issues
Load studies – verify electrical system capacity before adding loads
Energy assessments – quantify energy consumption before and after improvements to justify energy saving devices
Features:
Complete three-phase troubleshooting tool: measures virtually every power system parameter: voltage, current, frequency, power, power consumption (energy), unbalance and flicker, harmonics and inter-harmonics. Captures events like dips and swells, transients, interruptions and rapid voltage changes.
The Fluke 435 features 0.1 percent voltage accuracy making it fully compliant with the IEC 61000-4-30 Class A standard
Logger function: record the detail you need. Detailed, user-configurable long-time recording gives you the MIN, MAX and AVG readings of up to 100 parameters on all 4 phases with selectable averaging time down to 0.5 seconds. Enough memory is available to record 400 parameters with 1 minute resolution for up to a month.
Four channels: simultaneously measures voltage and current on all three phases and neutral.
AutoScaling: easier trend analysis with automatic scaling of the vertical axis you will always use the full display to view the waveforms.
Automatic transient display: captures up to 40 dips, swells, interruptions or transients automatically.
Meets the stringent 600 V CAT IV, 1000 V CAT III safety standard required for measurements at the service entrance.
Rugged, handheld instrument operates for more than 7 hours on included rechargeable NiMH battery pack. Menu-driven interface simplifies operation.
Extensive data analysis possibilities. Cursors and zoom can be used ‘live’ while taking the measurements, or ‘offline’ on stored measurement data. The stored measurements can also be transferred to a PC with FlukeView software.
The Fluke 435 comes with Power log software to analyse recorded data and to create reports.
Complies with IEC 61000-4-30 measurement standards
Power quality analyzer selection table
435
434*
Measures voltage, current, dips, swells, interruptions,
harmonics, inter-harmonics, flicker, power, energy,
transients, frequency, unbalance, inrush, EN50160 overview
•
•
Logger function with multi-parameter logging
•
optional*
Mains signaling
•
optional*
Memory size
16 MB
8 MB
Current probes
3000 A flexible
(4)
40 A/400 A
clamp (4)
Carrying case
water-tight hard
case with rollers
rugged hard case
Software
Fluke Power Log
and FlukeView®
FlukeView®
Technical Data
Inputs
Number:
4 voltage and current (3 phases + neutral)
Maximum voltage:
1000 Vrms (6 kV peak)
Maximum sampling speed:
200 kS/s on each channel simultaneously
Volt/Amps/Hertz
Vrms (AC + DC)
Measurement range:
1 ... 1000 V
Accuracy:
0.1% of Vnom
Vpeak
Measurement range:
1 ... 1400 V
Accuracy:
5% of Vnom
Crest factor, voltage
Measurement range:
1.0 ... > 2.8
Accuracy:
±5%
Arms (AC + DC)
Measurement range:
0 ... 20 kA
Accuracy:
±0.5% ± 5 counts
Apeak
Measurement range:
0 ... 5.5 kA
Accuracy:
5%
Crest factor, A
Measurement range:
1 ... 10
Accuracy:
±5%
Hz 50 Hz nominal
Measurement range:
40 ... 70 Hz
Accuracy:
±0.01 Hz
Dips and swells
Vrms (AC+DC) ²
Measurement range:
0.0% … 100% of Vnom
Accuracy:
±0.2% of nominal voltage
Arms (AC+DC) ²
Measurement range:
0 ... 20 kA 
Accuracy:
±1% ± 5 counts
Harmonics
Harmonic (interharmonic) (n)
Measurement range:
DC, 1..50; (Off, 1..49) measured according to IEC 61000-4-7
Vrms
Measurement range:
0.0 … 1000 V
Accuracy:
±0.05% of nominal voltage
Arms
Measurement range:
0.0 … 4000 mV x clamp scaling
Accuracy:
±5% ± 5 counts
Watts
Measurement range:
Depends on clamp scaling and voltage
Accuracy:
±5% ± n x 2% or reading, ± 10 counts
DC voltage
Measurement range:
0.0 … 1000 V
Accuracy:
±0.2% of nominal voltage
THD
Measurement range:
0.0 … 100.0%
Accuracy:
±2.5% V and A (± 5% Watt)
Hz
Measurement range:
0 … 3500 Hz
Accuracy:
± 1 Hz
Phase angle
Measurement range:
-360º ... +360º
Accuracy:
± n × 1.5º
Power and energy
Watt, VA, VAR
Measurement range:
1.0 … 20.00 MVA¹
Accuracy:
±1% ± counts
kWh, kVAh, kVARh
Measurement range:
00.00 …200.0 GVAh¹
Accuracy:
± 1.5% ± 10 counts
Power Factor/ Cos Ф / DPF
Measurement range:
0…1
Accuracy:
± 0.03
Flicker
Pst (1 min), Pst, Plt, PF5
Measurement range:
0.00 … 20.00
Accuracy:
±5%
Unbalance
Volts
Measurement range:
0.0 … 5.0%
Accuracy:
±0.5%
Current
Measurement range:
0.0 … 20%
Accuracy:
± 1%
Transient Capture
Volts
Measurement range:
±6000 V
Accuracy:
±2.5% of Vrms
Minimum detect duration
5 µs (200kS/s sampling)
Inrush mode
Arms (AC+DC)
Measurement range:
0.000 … 20.00 kA¹
Accuracy:
±1% of meas ± 5 counts
Inrush duration (selectable)
Measurement range:
7.5 s ... 30 min
Accuracy:
±20 ms (Fnom = 50 Hz)
Autotrend recording
Sampling:
5 readings/sec continuous sampling per channel
Memory:
1800 min, max and avg points for each reading
Recording time:
Up to 450 days
Zoom:
Up to 12x horizontal zoom
Memory
Screens & data:
50, shared memory divided between logging, screens and data sets
Notes
¹
Depending on clamp scaling
²
Value is measured over 1 cycle, commencing at a fundamental zero crossing, and refreshed each half-cycle
For full Fluke 435 product specifications, please click here:
Fluke 435
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management